Surface Preparation Equipment

Descriptions & Daily Rates

Weekly Rates: 5% Discount

Tomahawk Concrete Surface Prep for Epoxy Floors GH Alaska Wasilla

WARRIOR TOMAHAWK GRINDER 1776

Applications:

Concrete surface preparation, coating removal, and concrete polishing


Specifications:

  • Voltage: 220V 1-Phase or 3-Phase
  • Horsepower: 5.5 HP
  • Weight: 475 lb
  • Grinding Path: 17.71"
  • Head Pressure: 264.5 lb
  • Speed / RPM: 745 RPM
  • Drive Type: Detachable head
  • Inverter: 4kW / 5.5 HP

Equipment/Item Daily Rate
Warrior Tomahawk Grinder $375.00
4-wire Pigtail: 50-amp, 220 volt (for power panel) $25.00
Power Cord, 50′ $25.00
Set of 9 Diamonds (16/18 grit) $123.75
TOTAL DAILY RATE
$548.75
Epoxy Installation Concrete Prep with Samson 2618 Rental Equipment in Anchorage from GH Alaska

The Samson is at least one-third faster than the Tomahawk, depending on the hardness of the concrete. The harder the concrete, the greater the speed advantage, thanks to the Samson’s heavier weight and more aggressive performance.

WARRIOR SAMSON GRINDER 2618

Applications:

Concrete surface preparation, coating removal, and concrete polishing


Specifications:

  • Voltage: 220V 1-Phase or 3-Phase
  • Horsepower: 10 HP
  • Weight: 919 lb
  • Grinding Path: 26.18"
  • Head Pressure: 264–440 lb
  • Speed / RPM: 300–1,560 RPM
  • Drive Type: Fully gear driven
  • Inverter: 15 kW



Equipment / Item Daily Rate
Samson 2618 $490.00
4-wire Pigtail: 50-amp, 220 volt (for power panel) $25.00
Power Cord, 50′ $25.00
Set of 12 Diamonds (16/18 grit) $165.00
TOTAL DAILY RATE
$705.00
Surface Prep Equipment for Rent for Epoxy Floors Diamond Grinders

LEONIDAS 2692 Propane

Applications:

Concrete surface preparation, coating removal, and concrete polishing


Specifications:

  • Voltage:
  • Horsepower: 27 HP
  • Weight: 1,150 lb
  • Grinding Path: 26.92"
  • Head Pressure: 370–600 lb
  • Speed / RPM: 300–1,200 RPM
  • Drive Type: Fully gear planetary driven

Equipment / Item Daily Rate
Leonidas Propane Grinder $510.00
1 set of 16/18 grit diamonds (set of 12) $165
Propane Tank: Full & Returned Full $25.00
Diamond Grinders for Rent Wasilla for Epoxy Floor Prep

WARRIOR CRUSADER 2204

Applications:

Concrete surface preparation, coating removal, and concrete polishing


Specifications:

  • Voltage: 220V, Single Phase
  • Horsepower: 5.5 HP
  • Weight: 530 lb
  • Grinding Path: 22.04"
  • Head Pressure: 180–295 lb
  • Speed / RPM: 0–700 RPM
  • Drive Type: Fully gear driven, two-head, six-tool concrete grinder
  • Inverter: 5.5 kW


Equipment/Item Daily Rate
Warrior Crusader Grinder $375.00
4-wire Pigtail: 50-amp, 220 volt (for power panel) $25.00
Power Cord, 50′ $25.00
Set of 6 Diamonds (16/18 grit) $82.50
TOTAL DAILY RATE
$507.50
GH Alaska provided Epoxy Installing Equipment for Rent. This is a Dimond Grinder Polisher.

The DG-16  walk behind has a 16" floating grinding head which adjusts up and down using spring pressure. This enables consistent contact, while the integrated shroud keeps the machine and work area virtually dust free when connected to a Pulse Vac.

BW DG-16

Applications:

Concrete surface preparation, coating removal, and concrete polishing on dry concrete


Specifications:

  • Voltage: 220V Single Phase
  • Horsepower: 5 HP
  • Weight: 210 lb
  • Generator Requirements: 

15,000 KW with a 50 Amp Breaker

  • Grinding Path: 16"Speed / RPM: 0–700 RPM
  • Speed / RPM: 0–700 RPM
  • Production Capacity: 700-1000 Sq Ft / Hr
  • Clearance to Wall:
  • Side Clearance 1" (3cm)
  • Front Clearance 6" (15cm)
  • Diamond Life: 3000 - 7000 Sq Ft


Equipment / Item Daily Rate
BW DG-16 $289.00
Pigtail for power panel (Single phase 30-amp, 220 volt) $25.00
30-amp, Single phase twist lock Cord, 50′ $35.00
Set of 3 Diamonds (BW Red, #30 Coarse Grit) $41.25
TOTAL DAILY RATE
$390.25
Rental Equipment for Epoxy Floor Installation Wasilla GH Alaska

BW-SB 6" SHOT BLASTER

Applications:

Garage Floor Prep, Under Shelving, Trim Work, Basement Floors, Line Stripes


Specifications:

  • Voltage: 120V – 15 Amps
  • Horsepower: 3.4 HP
  • Weight: 120 lb
  • Cleaning Path: 6"
  • Production Capability:

200–400 sq ft / hour

  • Shot Capacity: 15 lb
  • Blast Clearance from Wall:
  • Side: 1.25"
  • Front: 10"
  • Rear: 6"


Equipment / Item Daily Rate
BW-SB 6” Shot Blaster $140.00
Shot, per lb. $2.06
Magnetic Broom
 $20.00
Equipment Rentals in Wasilla Ride On Grinders from GH Alaska

BW 1200 RIDER

Applications:

  • Grinder
  • Shot Blaster

Equipment / Item Daily Rate
BW 1200 Rider $980.00
Operator (required) $520.00
Diamond Tooling, Set of 6 $195.00
Delivery: Truck/Trailer $98.00
Return Pick-up: Truck/Trailer $98.00
TOTAL DAILY RATE
$1,500.00
Concrete Scarifier for DIY Epoxy Installation Rental Equipment

EDCO 8" Concrete Scarifier

  • Voltage:       Single Phase
  • Horsepower: 5 HP

Equipment / Item Daily Rate
EDCO 8” Scarifier $235.00
Scarifier Drum with tungsten (carbide) cutters $190.00
Scarifier Drum with steel cutters $105.00
Power cord, 50′ (30-amp 220-volt) $20.00
Power cord, 50′ (30-amp 220-volt with bare ends for panel or different plug configuration) $20.00
Floor grinder with a black body, two hoses, and a red handle.

National Grinder

Specifications:

  • Variable Speed
  • 110 V

Includes:

  • 5" Velcro plates, set of 3

Equipment / Item Daily Rate
National Grinder $225.00
After 7 days rental $150.00
Dewalt Concrete Surface Grinder Rental Wasilla

De WALT Surface Grinder

Applications:

Concrete Surface Grinder for Edges


Specifications:

  • Grinding Path: 5"
  • Comes with Dust Muzzle


Equipment / Item Daily Rate
DeWALT Concrete Surface Grinder $33.00
5" Concrete Diamond Cup $12.00
TOTAL DAILY RATE
$45.00
5

5" Max XT

Applications:

Concrete Surface Grinder for Edges


Specifications:

  • Grinding Path: 5"
  • Comes with Dust Muzzle


Equipment / Item Daily Rate
5" Max XT Concrete Surface Grinder $33.00
5" Concrete Diamond Cup $12.00
TOTAL DAILY RATE
$45.00
Hawk Brute 360 Grinder Rental Equipment in Wasilla AK

Hawk Brute 360 

17" HD Sander/Buffer (includes pad driver)


Applications:

Stripping, Sanding, Buffing, Resurfacing


Specifications:

  • Voltage: 115V / 60Hz
  • Horsepower: 1.5 HP
  • Weight: 133 lbs

Equipment / Item Daily Rate
Brute 360 Sander/Buffer
Includes pad driver 		$65.00

Additional Accessories Price
17" White Buffing Pad (required)
(60, 80, or 100 Grit) 		$12.50
Sanding Screens
Need 1 sanding screen per 100 SF 		$9.50
E26 Vacuum GH Alaska providing Epoxy Equipment Rentals in Wasilla

E26 Vacuum

Specifications:

  • Power: 3.2 HP
  • Voltage: 120V / 60HZ
  • Air Flow: 236 CFMM
  • Water Lift: 100"
  • Suction Inlet: 2"
  • Prefilter: 30FT2, >99.99% @ 0.3UM
  • Dimensions: 21.4" x 27.5" x 52"
  • Weight: 125 lbs


2" Tool Kit:

Floor brush, Crevice tool Adaptor, 24.5' Hose, Wand



Equipment / Item Daily Rate
E26 Vacuum
Includes hose and bags 		$140.00
E36 Vacuum GH Alaska providing Epoxy Equipment Rentals in Wasilla

E36 Vacuum

Specifications:

  • Power: 3.2 HP
  • Voltage: 120V
  • Air Flow: 285 CFMM
  • Water Lift: 72"
  • Suction Inlet: 2"
  • Prefilter: 45FT2, >99.99% @ 0.3UM
  • Dimensions: 21.4" x 32.3" x 57.4"
  • Weight: 143 lbs


2" Tool Kit:

Floor brush, Crevice tool Adaptor, 24.5' Hose, Wand



Equipment / Item Daily Rate
E36 Vacuum
Includes hose and bags 		$150.00

GENSET 20 KW

  • 207 low volt, 3 phase
  • Fuel: Gas


Ramp Trailer needed -too heavy to lift into a pickup.

Equipment / Item Daily Rate
Genset 20 kW $175.00
Ball and Receiver
2-5/16" ball 		$5.00
Gas: rented full and returned full

GENSET 120 KW

Tow-behind Generator

  • Trailer mount
  • 3 phase: 208 low volt or 480 high volt
  • Fuel: Diesel


Requires a 2-5/16" ball and HD truck

Equipment / Item Daily Rate
Genset 120 kW $255.00
Ball and Receiver
2-5/16" ball 		$5.00
Diesel: rented full and returned full

POWER: CORDS, SPIDER BOX, AMP Breaker

Rental Powercords Epoxy Machines

Equipment / Item Daily Rate
50′ Standard 4-Wire 50-Amp Spider Box Cord $27.00
75′ Standard 4-Wire 50-Amp Spider Box Cord $40.50
Spider Box
 $25.00

Equipment / Item PRICE
50 amp breaker (new) $25.00
50 amp breaker installation $25.00

Polishing Pucks

Hybrid Pucks

Equipment / Item Price
100 Grit Hybrids (Set of 6) $120.00
200 Grit Hybrids (Set of 6) $120.00
400 Grit Hybrids (Set of 6) $120.00
Hybrid Pucks for Polishing Epoxy Floors

Hogs Hair Pads

Item Price
Hogs Hair Pads – 5″ for purchase only $15.50
Hogs Hair Pads for Epoxy Floor Polishing Wasilla and Anchorage

Resin Pucks

Equipment / Item Price
200 Grit Pucks (Set of 6) $120.00
400 Grit Pucks (Set of 6) $120.00
800 Grit Pucks (Set of 6) $120.00
1500 Grit Pucks (Set of 6) $120.00
Resin Pucks used for Epoxy Floor Installation available in Anchorage and Wasilla
Hand Masker tool for epoxy installation prep available
Pro Metal Roller 12'-18' for Epoxy Installation available for rent at GH Alaska

 Tools & Accessories

Essential finishing tools to help you achieve a perfect epoxy floor.

Equipment / Item Daily Rate
Hand Masker $7.00
12″–18″ Adjustable Roller Frame $3.00

Optional Add-on Services

Take the guesswork out of your project with delivery, setup, and expert guidance options. Whether you’re renting for a home garage or a commercial space, we’re here to make sure everything runs smoothly from start to finish

Optional Add-on Services

Take the guesswork out of your project with delivery, setup, and expert guidance options. Whether you’re renting for a home garage or a commercial space, we’re here to make sure everything runs smoothly from start to finish

1. Delivery and Return Pick-Up

GH Alaska will deliver your rental equipment directly to your job site and pick it up when you’re done, saving you time and hassle.


Note: If you plan to transport equipment yourself, it must be secured properly:
• Use an enclosed trailer, or
• If using an open trailer, you must provide ratchet straps, plastic, and duct tape to protect equipment from movement and weather.


Client is responsible for all damage during transport.


Delivery per hour to and from shop $98.00
Return pick-up per hour to and from shop $98.00
Incl driver, truck, enclosed trailer, ramp & fuel

1. Delivery and Return Pick-Up

GH Alaska will deliver your rental equipment directly to your job site and pick it up when you’re done, saving you time and hassle.


Note: If you plan to transport equipment yourself, it must be secured properly:
• Use an enclosed trailer, or
• If using an open trailer, you must provide ratchet straps, plastic, and duct tape to protect equipment from movement and weather.


Client is responsible for all damage during transport.


Delivery per hour to and from shop $98.00
Return pick-up per hour to and from shop $98.00

Includes driver, truck, and enclosed trailer

with ramp and fuel

2. On-Site Instruction / Travel

Get professional guidance right where you need it.
Examples include:

  • Connecting pigtails to an electrical panel
  • Grinder operator training
  • Pulse-vac operator training

Our on-site instruction helps ensure safe, efficient, and proper equipment use. This reduces downtime and improves your results.


Onsite Instruction / Travel per hour $125.00
Additional Instruction per hour $125.00
ex. calls, emails, texts

2. On-Site Instruction / Travel

Get professional guidance right where you need it.
Examples include:

  • Connecting pigtails to an electrical panel
  • Grinder operator training
  • Pulse-vac operator training

Our on-site instruction helps ensure safe, efficient, and proper equipment use. This reduces downtime and improves your results.


Onsite Instruction / Travel per hour $125.00
Additional Instruction per hour (calls, emails, and texts) $125.00

3. Customized Project Plan

Not sure where to start? Let our expert help you plan it right the first time. Your detailed work plan includes:

  • Recommended equipment and materials
  • Step-by-step application process
  • Estimated project timeline


This is available for any of the following:

  • Full broadcast flake floors
  • Solid color floors
  • Metallic epoxy floors
  • Polished concrete floors
Customized Project Plan $175.00